In this smart era, industrial touch screens have become a necessity in life. But everyone is not aware of the skills and how to use industrial touch screens. The following Industrial Touch Screen Manufacturers will give you a detailed introduction.

1. If you are using a capacitive industrial touch screen, it is recommended that when you use it for the first time, first install the driver required by the capacitive industrial touch screen to run the screen calibration program according to the requirements of the manual. After the calibration is completed, The system automatically stores the calibrated data in the register of the controller, and there is no need to calibrate the screen after restarting the system.

2. When using the resistive industrial touch screen, if you find that the cursor does not move or can only move in a partial area, you can check whether the touch area of the touch screen is pressed by other touch objects, for example, once the touch screen is pressed by the display shell of the cabinet shell, It is equivalent to a certain point being touched all the time, then the coordinate position feedback to the controller is not accurate, and of course, the cursor cannot be positioned correctly. If the cabinet shell is pressing the touch area, you can increase the distance between the cabinet and the Industrial Display Screen. If the display shell is pressing the touch area, you can try to loosen the screws of the display shell a bit.

Industrial Touch Screen

3. In order to ensure the normal operation of the industrial touch screen system, in addition to ensuring the correct installation of the system software, you must remember not to install two or more touch, screen drivers, on a host, which will easily cause the system to run Conflict occurs at the time, so that the touch screen system cannot be used normally.

How to choose an industrial touch screen?

1. Need to consider the budget

There are many Industrial Touch Screen brands in the domestic market, including high, medium, and low grades. Among them, there are many high-quality international first-line brands and affordable domestic brands. If the budget is sufficient and you look at major brands, you can choose international first-line brands.

If you are very concerned about the price, the required industrial touch screen can only be used as a monitor and not often used for control input. Then you can choose some domestic brands at relatively low prices. If you do not have an extremely ample budget and often use the input control of an industrial touch screen, you can consider a Taiwanese brand with a strong performance in the middle.

2. Recognize the needs

Generally speaking, some products of international first-line brand industrial touch screens have a relatively narrow application range. They can only be used for products of their own brand, or even some series of products of their own brand. They cannot adapt to other brands of equipment on the market, so try to choose strong adaptability. device of.

3. Look at performance and certification

Check whether there are domestic and foreign certifications, it is recommended to try it or find a dedicated person or equipment to test the performance.

The above is the answer to everyone on how to use and purchase industrial touch screens, hoping to help you buy satisfactory products and use them comfortably.